当前位置： 首页 > news >正文

百度网盘可以做网站吗推广软件下载

news 2025/7/7 4:09:29
百度网盘可以做网站吗,推广软件下载,企业做的网站推广方案的步骤,厦门网站设计品牌企业iic.c /* # I2C代码片段说明1. 本文件夹中提供的驱动代码供参赛选手完成程序设计参考。2. 参赛选手可以自行编写相关代码或以该代码为基础&#xff0c;根据所选单片机类型、运行速度和试题中对单片机时钟频率的要求&#xff0c;进行代码调试和修改。 */ #include <STC1…

 

 

 

 

iic.c

/*	#   I2C代码片段说明1. 	本文件夹中提供的驱动代码供参赛选手完成程序设计参考。2. 	参赛选手可以自行编写相关代码或以该代码为基础，根据所选单片机类型、运行速度和试题中对单片机时钟频率的要求，进行代码调试和修改。
*/
#include <STC15F2K60S2.H>
#include "iic.h"
#include "intrins.h"sbit scl = P2^0;
sbit sda = P2^1;#define DELAY_TIME	5//
static void I2C_Delay(unsigned char n)
{do{_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();_nop_();		}while(n--);      	
}//
void I2CStart(void)
{sda = 1;scl = 1;I2C_Delay(DELAY_TIME);sda = 0;I2C_Delay(DELAY_TIME);scl = 0;    
}//
void I2CStop(void)
{sda = 0;scl = 1;I2C_Delay(DELAY_TIME);sda = 1;I2C_Delay(DELAY_TIME);
}//
void I2CSendByte(unsigned char byt)
{unsigned char i;for(i=0; i<8; i++){scl = 0;I2C_Delay(DELAY_TIME);if(byt & 0x80){sda = 1;}else{sda = 0;}I2C_Delay(DELAY_TIME);scl = 1;byt <<= 1;I2C_Delay(DELAY_TIME);}scl = 0;  
}//
unsigned char I2CReceiveByte(void)
{unsigned char da;unsigned char i;for(i=0;i<8;i++){   scl = 1;I2C_Delay(DELAY_TIME);da <<= 1;if(sda) da |= 0x01;scl = 0;I2C_Delay(DELAY_TIME);}return da;    
}//
unsigned char I2CWaitAck(void)
{unsigned char ackbit;scl = 1;I2C_Delay(DELAY_TIME);ackbit = sda; scl = 0;I2C_Delay(DELAY_TIME);return ackbit;
}//
void I2CSendAck(unsigned char ackbit)
{scl = 0;sda = ackbit; I2C_Delay(DELAY_TIME);scl = 1;I2C_Delay(DELAY_TIME);scl = 0; sda = 1;I2C_Delay(DELAY_TIME);
}unsigned int Read_v()
{unsigned int temp;I2CStart();I2CSendByte(0x90);I2CWaitAck();I2CSendByte(0x01);I2CWaitAck();I2CStart();I2CSendByte(0x91);I2CWaitAck();temp = I2CReceiveByte();I2CSendAck(1);I2CStop();return temp;
}

 iic.h

#ifndef __iic_h
#define __iic_hstatic void I2C_Delay(unsigned char n);
void I2CStart(void);
void I2CStop(void);
void I2CSendByte(unsigned char byt);
unsigned char I2CReceiveByte(void);
unsigned char I2CWaitAck(void);
void I2CSendAck(unsigned char ackbit);
unsigned int Read_v();#endif

onewire.c

/*	# 	单总线代码片段说明1. 	本文件夹中提供的驱动代码供参赛选手完成程序设计参考。2. 	参赛选手可以自行编写相关代码或以该代码为基础，根据所选单片机类型、运行速度和试题中对单片机时钟频率的要求，进行代码调试和修改。
*///
#include <STC15F2K60S2.H>
#include "onewire.h"sbit DQ = P1^4;void Delay_OneWire(unsigned int t)  
{unsigned char i;while(t--){for(i=0;i<12;i++);}
}//
void Write_DS18B20(unsigned char dat)
{unsigned char i;for(i=0;i<8;i++){DQ = 0;DQ = dat&0x01;Delay_OneWire(5);DQ = 1;dat >>= 1;}Delay_OneWire(5);
}//
unsigned char Read_DS18B20(void)
{unsigned char i;unsigned char dat;for(i=0;i<8;i++){DQ = 0;dat >>= 1;DQ = 1;if(DQ){dat |= 0x80;}	    Delay_OneWire(5);}return dat;
}//
bit init_ds18b20(void)
{bit initflag = 0;DQ = 1;Delay_OneWire(12);DQ = 0;Delay_OneWire(80);DQ = 1;Delay_OneWire(10); initflag = DQ;     Delay_OneWire(5);return initflag;
}unsigned int Read_temp()
{unsigned char LSB ,MSB;init_ds18b20();Write_DS18B20(0xcc);Write_DS18B20(0x44);init_ds18b20();Write_DS18B20(0xcc);Write_DS18B20(0xbe);LSB = Read_DS18B20();MSB = Read_DS18B20();return (MSB << 8 | LSB ) * 0.625;
}

onewire.h

#ifndef __onewire_h
#define __onewire_hvoid Delay_OneWire(unsigned int t);
void Write_DS18B20(unsigned char dat);
unsigned char Read_DS18B20(void);
bit init_ds18b20(void);
unsigned int Read_temp();#endif

ds1302.c

/*	# 	DS1302代码片段说明1. 	本文件夹中提供的驱动代码供参赛选手完成程序设计参考。2. 	参赛选手可以自行编写相关代码或以该代码为基础，根据所选单片机类型、运行速度和试题中对单片机时钟频率的要求，进行代码调试和修改。
*/								//
#include <STC15F2K60S2.H>
#include "ds1302.h"
#include "intrins.h"sbit SCK = P1^7;
sbit SDA = P2^3;
sbit RST = P1^3;code unsigned char Write_addr[] = {0x80,0x82,0x84,0x86,0x88,0x8a,0x8c};
code unsigned char Read_addr[] = {0x81,0x83,0x85,0x87,0x89,0x8b,0x8d};
unsigned char time[] = {0x50,0x59,0x16};
void Write_Ds1302(unsigned  char temp) 
{unsigned char i;for (i=0;i<8;i++)     	{ SCK = 0;SDA = temp&0x01;temp>>=1; SCK=1;}
}   //
void Write_Ds1302_Byte( unsigned char address,unsigned char dat )     
{RST=0;	_nop_();SCK=0;	_nop_();RST=1; 	_nop_();  Write_Ds1302(address);	Write_Ds1302(dat);		RST=0; 
}//
unsigned char Read_Ds1302_Byte ( unsigned char address )
{unsigned char i,temp=0x00;RST=0;	_nop_();SCK=0;	_nop_();RST=1;	_nop_();Write_Ds1302(address);for (i=0;i<8;i++) 	{		SCK=0;temp>>=1;	if(SDA)temp|=0x80;	SCK=1;} RST=0;	_nop_();SCK=0;	_nop_();SCK=1;	_nop_();SDA=0;	_nop_();SDA=1;	_nop_();return (temp);			
}void Write_time()
{char i;Write_Ds1302_Byte(0x8e,0x00);for(i = 0;i < 3;i++)Write_Ds1302_Byte(Write_addr[i],time[i]);Write_Ds1302_Byte(0x8e,0x80);
}void Read_time()
{char i;for(i = 0;i < 3;i++)time[i] = Read_Ds1302_Byte(Read_addr[i]);
}

ds1302.h

#ifndef __ds1302_h
#define __ds1302_hvoid Write_Ds1302(unsigned  char temp) ;
void Write_Ds1302_Byte( unsigned char address,unsigned char dat ) ;
unsigned char Read_Ds1302_Byte ( unsigned char address );
void Write_time();
void Read_time();#endif

sys.c

#include <STC15F2K60S2.H>
#include "sys.h"
#include "intrins.h"
void Delay_ms(unsigned int t)		//@12.000MHz
{while(t--){unsigned char i, j;i = 12;j = 169;do{while (--j);} while (--i);}
}void Select_Hc573(char n)
{switch(n){case 4:P2 = P2 & 0x1f | 0x80;break;case 5:P2 = P2 & 0x1f | 0xa0;break;case 6:P2 = P2 & 0x1f | 0xc0;break;case 7:P2 = P2 & 0x1f | 0xe0;break;}P2 = P2 & 0x1f;
}void Sys_Init()
{P0 = 0x00;Select_Hc573(5);P0 = 0xff;Select_Hc573(4);
}void Select_Bit(unsigned char pos,dat)
{P0 = 0x01 << pos;Select_Hc573(6);P0 = dat;Select_Hc573(7);Delay_ms(1);P0 = 0xff;Select_Hc573(7);
}

sys.h

#ifndef __sys_h
#define __sys_hvoid Delay_ms(unsigned int t);
void Select_Hc573(char n);
void Sys_Init();
void Select_Bit(unsigned char pos,dat);#endif

main.c

#include <STC15F2K60S2.H>
#include "ds1302.h"
#include "iic.h"
#include "onewire.h"
#include "sys.h"sbit R1 = P3^0;
sbit R2 = P3^1;
sbit R3 = P3^2;
sbit R4 = P3^3;
sbit C1 = P4^4;
sbit C2 = P4^2;
sbit C3 = P3^5;
sbit C4 = P3^4;code unsigned char SMG[] = { ~0x3F,~0x06,~0x5B,~0x4F,~0x66,~0x6D,~0x7D,~0x07,~0x7F,~0x6F,~0x71,~0x76};
extern unsigned char time[];
unsigned int temp;//温度
unsigned int v;//电压
bit v_stata;//	1-亮	0-暗
bit flag_500ms;
bit flag_10ms;
unsigned char count1;
unsigned int count2,count3;
char param_time = 17;//时间参数
char param_temp = 25;//温度参数
char param_led = 4;//led参数
unsigned char key_val;//键值
bit mode;//0-数据界面	1-参数界面
unsigned char mode_dat;//0-时间	1-温度	2-亮暗状态
unsigned char mode_param;//0-时间	1-温度	2-LED
bit L3_flag;//	0-灭	1-亮void Display_time()//时间界面
{Select_Bit(0,SMG[time[2] / 16]);Select_Bit(1,SMG[time[2] % 16]);Select_Bit(2,SMG[0]);Select_Bit(3,SMG[time[1] / 16]);Select_Bit(4,SMG[time[1] % 16]);Select_Bit(5,SMG[0]);Select_Bit(6,SMG[time[0] / 16]);Select_Bit(7,SMG[time[0] % 16]);
}void Display_temp()//温度界面
{Select_Bit(0,SMG[10]);Select_Bit(5,SMG[temp / 100]);Select_Bit(6,SMG[temp / 10 % 10] - 0x80);Select_Bit(7,SMG[temp % 10]);
}void Display_v()//亮暗状态显示
{Select_Bit(0,SMG[11]);Select_Bit(2,SMG[v / 100] - 0x80);Select_Bit(3,SMG[v / 10 % 10]);Select_Bit(4,SMG[v % 10]);Select_Bit(7,SMG[v_stata]);
}void Display_param_time()//时间参数界面
{Select_Bit(0,SMG[5]);Select_Bit(1,SMG[4]);Select_Bit(6,SMG[param_time / 10]);Select_Bit(7,SMG[param_time % 10]);
}void Display_param_temp()//温度参数界面
{Select_Bit(0,SMG[5]);Select_Bit(1,SMG[5]);Select_Bit(6,SMG[param_temp / 10]);Select_Bit(7,SMG[param_temp % 10]);
}void Display_param_led()//指示灯参数界面
{Select_Bit(0,SMG[5]);Select_Bit(1,SMG[6]);Select_Bit(7,SMG[param_led]);
}void Timer2Init(void)		//10毫秒@12.000MHz
{AUXR &= 0xFB;		//定时器时钟12T模式T2L = 0xF0;		//设置定时初值T2H = 0xD8;		//设置定时初值AUXR |= 0x10;		//定时器2开始计时IE2 = 1 << 2;EA = 1;
}void Timer2_isr() interrupt 12
{if(++count1 > 50){count1 = 0;flag_500ms = 1;//光敏电阻半秒刷新}flag_10ms = 1;//按键扫描刷新if(!v_stata)//L3判断{if(++count2 > 300){count2 = 0;L3_flag = 1;}count3 = 0;}else{count2 = 0;if(++count3 > 300){count3 = 0;L3_flag = 0;}}
}unsigned char Key_Scan()//按键扫描函数
{unsigned char temp = 0;static unsigned char cnt4 = 0;static unsigned char cnt5 = 0;static unsigned char cnt8 = 0;static unsigned char cnt9 = 0;if(flag_10ms){R3 = 0;R1 = R2 = R4 = C1 = C2 = C3 = C4 = 1;if(C1 == 0)	cnt5++;if(C1 == 1){if(cnt5 > 2)	temp = 5;cnt5 = 0;}if(C2 == 0)	cnt9++;if(C2 == 1){if(cnt9 > 2)	temp = 9;cnt9 = 0;}R4 = 0;R1 = R2 = R3 = C1 = C2 = C3 = C4 = 1;if(C1 == 0)	cnt4++;if(C1 == 1){if(cnt4 > 2)	temp = 4;cnt4 = 0;}if(C2 == 0)	cnt8++;if(C2 == 1){if(cnt8 > 2)	temp = 8;cnt8 = 0;}flag_10ms = 0;}return temp;
}void Key_Pro()
{switch(key_val){case 4:mode ^= 1;if(!mode)	mode_param = 0;else	mode_dat = 0;break;case 5:if(!mode){if(++mode_dat > 2)mode_dat = 0;}else{if(++mode_param > 2)mode_param = 0;}break;case 8:if(mode){switch(mode_param){case 0:if(--param_time < 0)param_time = 23;break;case 1:if(--param_temp < 0)param_temp = 99;break;case 2:if(--param_led < 4)param_led = 8;break;}}break;case 9:if(mode){switch(mode_param){case 0:if(++param_time > 23)param_time = 0;break;case 1:if(++param_temp > 99)param_temp = 0;break;case 2:if(++param_led > 8)param_led = 4;break;}}break;}
}void Led(unsigned char addr,enable)//LED底层代码
{static unsigned char temp = 0x00;static unsigned char temp_old = 0xff;if(enable)	temp |= 0x01 << addr;else	temp &= ~(0x01 << addr);if(temp != temp_old){P0 = ~temp;Select_Hc573(4);temp_old = temp;}
}void Led_Pro()//LED控制代码
{if(param_time <= time[2] / 16 * 10 + time[2] % 16)	Led(0,1);else	Led(0,0);if(((float)temp) / 10 < param_temp)	Led(1,1);else	Led(1,0);if(L3_flag)	Led(2,1);else	Led(2,0);if(!v_stata){switch(param_led){case 4:Led(3,1);Led(4,0);Led(5,0);Led(6,0);Led(7,0);break;case 5:Led(4,1);Led(3,0);Led(5,0);Led(6,0);Led(7,0);break;case 6:Led(5,1);Led(4,0);Led(3,0);Led(6,0);Led(7,0);break;case 7:Led(6,1);Led(4,0);Led(5,0);Led(3,0);Led(7,0);break;case 8:Led(7,1);Led(4,0);Led(5,0);Led(6,0);Led(3,0);break;}}else{Led(3,0);Led(4,0);Led(5,0);Led(6,0);Led(7,0);}
}void main()
{Sys_Init();//系统初始化关闭继电器和蜂鸣器Read_temp();//读取温度延时750ms以消除上电显示85Delay_ms(750);Write_time();//初始化写入时间Timer2Init();//定时器2初始化while(1){temp = Read_temp();//读取温度Read_time();//读取时间if(flag_500ms)//半秒读取一次光敏电阻电压{flag_500ms = 0;v = Read_v() / 51.0 * 100;}if(v > 150)	v_stata = 1;else	v_stata = 0;key_val = Key_Scan();//读取键值Key_Pro();//按键处理函数Led_Pro();//LED处理函数if(!mode)//0-数据界面	1-参数界面{switch(mode_dat)//0-时间界面	1-温度界面	2-亮暗状态界面{case 0:Display_time();break;case 1:Display_temp();break;case 2:Display_v();break;}}else//参数界面下{switch(mode_param)//0-时间参数界面	1-温度参数界面	2-LED参数界面{case 0:Display_param_time();break;case 1:Display_param_temp();break;case 2:Display_param_led();break;}}}
}

http://www.dt0577.cn/news/12483.html

相关文章：

  • web技术的网站开发做网站比较好的公司有哪些
  • 做网站怎么还用身份证关键词排名优化易下拉霸屏
  • 做网站组织结构框架例子百度提升排名
  • 高端商务经纪网站建设济宁百度推广开户
  • 武汉官网排名推广seo关键字优化技巧
  • 做新闻类网站一个新产品策划方案
  • 个人可以做网站推广百度广告屏蔽
  • 做网站 学什么万州网站建设
  • 网站应该怎么做运维windows优化大师可以卸载吗
  • 企业做产品网站费用大概是多少核心关键词是什么意思
  • 西安网站制作工商国产搜什么关键词最好看
  • 做游戏模板下载网站有哪些内容大概需要多少钱
  • wordpress中文版河南网站关键词优化代理
  • 腾讯疫情实时更新seo整站优化报价
  • 福州最好的网站建设怎么做百度推广
  • 宝安营销型网站设计如何制作自己的网站教程
  • 床品图案设计网站洛阳seo网络推广
  • 个人网站 icp 代理信阳百度推广公司电话
  • 衡水做淘宝网站吴忠seo
  • 怎么看behance和其他设计网站备案域名
  • 做网站需要哪些框架好f123网站
  • win2003做网站seo搜索引擎优化实战
  • 深圳 seo 外贸网站建设 多语种杭州百度推广开户
  • 网站开发超链接点击后变色防疫优化措施
  • 4个月ui设计培训靠谱吗徐州seo管理
  • 企业网站后台管理系统模板青岛网站制作
  • 公司内网网站建设seo中文全称是什么
  • 深圳做自适应网站公司国内最新新闻消息今天的
  • 给素材网站做素材方法网站建设服务商
  • 怎么给网站做外链邵连虎珠海网络推广公司