怎么做赌球网站的代理网上seo研究
文章目录
- esp-rs 简介
- Github
- Rust 包仓库
- Rust 教程
- Wokwi 电子模拟器
- 开发环境
- Rust 环境
- esp-rs 环境
- 创建 ESP32C3 项目
- 项目结构
- 编译项目命令
- 运行模拟器
- ESP32C3 烧录
esp-rs 简介
esp-rs 是一个专注于为 Espressif 系列芯片（如 ESP32、ESP32-S2、ESP32-C3 等）提供 Rust 语言支持的社区和项目。它的目标是为开发者提供一个高效、安全且易于使用的 Rust 开发环境，以便在 Espressif 芯片上进行嵌入式系统开发。
- 构建工具
| 存储库 | 描述 |
|---|---|
| esp-rs/rust | 带有 Xtensa 支持的 Rust 编译器分支 |
| esp-rs/rust-build | Rust 编译器 fork 的预构建二进制文件以及安装脚本 |
- 硬件抽象层
| 存储库 | 描述 |
|---|---|
| esp-rs/esp-idf-hal | 支持 Rust 标准库（std） |
| esp-rs/esp-hal | 不支持 Rust 标准库 ( no_std) |
Github
- esp-rs：https://github.com/esp-rs
- esp-hal 非标准库：https://github.com/esp-rs/esp-hal
- 本章示例项目源码：https://github.com/WuFengSheng/esp-rs-demo
Rust 包仓库
- https://crates.io/
Rust 教程
- https://rustwiki.org/zh-CN/book/
- https://rustwiki.org/zh-CN/rust-by-example/index.html
Wokwi 电子模拟器
- https://wokwi.com/projects/410182337086340097
开发环境
Rust 环境
- 参考我的这篇文章 《使用 Rustup 管理 Rust 版本》
# 安装 nightly 版本
rustup install nightly
# 设置默认 Rust 版本
rustup default nightly
# 当前 Rust 版本
rustc --version
esp-rs 环境
- espup安装
用于安装和维护使用 Rust 为 Espressif SoC 开发应用程序所需的工具链的工具。https://github.com/esp-rs/rust-build
cargo install espup
espup install
. $HOME/export-esp.sh
- RISC-V 安装
以下指令专门针对基于 RISC-V 架构的 ESP32-C
rustup target add riscv32imc-unknown-none-elf
rustup component add rust-src --toolchain nightly
# 安装 cargo-generate
cargo install cargo-generate
cargo generate -h
# 安装 espflash
cargo install espflash
espflash --help
espflash flash --help
创建 ESP32C3 项目
cargo generate -a esp-rs/esp-template
项目结构
- Cargo.toml
[dependencies]
esp-backtrace = { version = "0.14.0", features = ["esp32c3","exception-handler","panic-handler","println",
] }
esp-hal = { version = "0.20.1", features = [ "esp32c3" ] }
esp-println = { version = "0.11.0", features = ["esp32c3", "log"] }
log = { version = "0.4.21" }
- main.rs
#![no_std]
#![no_main]
#![allow(dead_code)]use esp_backtrace as _;
use esp_hal::{clock::ClockControl, delay::Delay, peripherals::{Peripherals, I2C0}, Blocking,prelude::*, system::SystemControl, gpio::{Io, Level, Output},i2c::I2C
};const I2C_ADDR: u8 = 0x27; // LCD1602的I2C地址// LCD 指令
const LCD_CMD_CLEAR: u8 = 0x01;
const LCD_CMD_HOME: u8 = 0x02;
const LCD_CMD_ENTRY_MODE: u8 = 0x04;
const LCD_CMD_DISPLAY_CONTROL: u8 = 0x08;
const LCD_CMD_FUNCTION_SET: u8 = 0x20;
const LCD_CMD_SET_DDRAM_ADDR: u8 = 0x80;// LCD 控制位
const LCD_BACKLIGHT: u8 = 0x08;
const ENABLE: u8 = 0x04;
const RW_WRITE: u8 = 0x00;
const RS_DATA: u8 = 0x01;
const RS_COMMAND: u8 = 0x00;#[entry]
fn main() -> ! {let peripherals = Peripherals::take();let system = SystemControl::new(peripherals.SYSTEM);let clocks = ClockControl::max(system.clock_control).freeze();let delay = Delay::new(&clocks);esp_println::logger::init_logger_from_env();// Set GPIO0 as an output, and set its state high initially.let io = Io::new(peripherals.GPIO, peripherals.IO_MUX);let mut led = Output::new(io.pins.gpio0, Level::High);// 初始化 I2Clet mut i2c: I2C<I2C0, Blocking> = I2C::new(peripherals.I2C0, io.pins.gpio6, io.pins.gpio5, 400.kHz(), &clocks);log::info!("The type of i2c is: {}", core::any::type_name_of_val(&i2c));// 初始化 LCDlcd_init(&mut i2c);lcd_write_string(&mut i2c, "Hello, World!");loop {log::info!("Hello world! \n");led.toggle();delay.delay(500.millis());}
}fn lcd_init(i2c: &mut I2C<I2C0, Blocking>) {// 设置 4-bit 模式lcd_command(i2c, 0x33); // 初始化指令lcd_command(i2c, 0x32); // 设置4-bit模式lcd_command(i2c, LCD_CMD_FUNCTION_SET | 0x08); // 2行显示lcd_command(i2c, LCD_CMD_DISPLAY_CONTROL | 0x0F); // 打开显示，有光标，会闪烁lcd_command(i2c, LCD_CMD_CLEAR); // 清屏lcd_command(i2c, LCD_CMD_ENTRY_MODE | 0x02); // 设置光标移动方向
}fn lcd_command(i2c: &mut I2C<I2C0, Blocking>, command: u8) {lcd_write(i2c, command, RS_COMMAND);
}fn lcd_data(i2c: &mut I2C<I2C0, Blocking>, data: u8) {lcd_write(i2c, data, RS_DATA);
}fn lcd_write(i2c: &mut I2C<I2C0, Blocking>, data: u8, mode: u8) {let high_nibble = data & 0xF0;let low_nibble = (data << 4) & 0xF0;lcd_send_nibble(i2c, high_nibble | mode);lcd_send_nibble(i2c, low_nibble | mode);
}fn lcd_send_nibble(i2c: &mut I2C<I2C0, Blocking>, nibble: u8) {// 发送高4位let data = nibble | LCD_BACKLIGHT;let _ = i2c.write(I2C_ADDR, &[data | ENABLE]);let _ = i2c.write(I2C_ADDR, &[data & !ENABLE]);
}fn lcd_write_string(i2c: &mut I2C<I2C0, Blocking>, s: &str) {for c in s.chars() {lcd_data(i2c, c as u8);}
}
- diagram.json
{"version": 1,"editor": "wokwi","author": "WuFengSheng <469742978@qq.com>","parts": [{"type": "board-esp32-c3-devkitm-1","id": "esp","top": 0.59,"left": 0.67,"attrs": {"flashSize": "16"}},{"type": "wokwi-led","id": "led1","top": -20,"left": -50,"attrs": {"color": "red"}},{"type": "wokwi-resistor","id": "r1","top": 50,"left": -54.5,"rotate": 90,"attrs": {}},{"type": "wokwi-lcd1602","id": "lcd1","top": 46,"left": 132.07,"attrs": {"pins": "i2c"}},{"type": "wokwi-vcc","id": "vcc1","top": 20,"left": 105,"attrs": {}}],"connections": [["esp:TX","$serialMonitor:RX","",[]],["esp:RX","$serialMonitor:TX","",[]],["esp:GND.4","led1:C","black",["h0"]],["led1:A","r1:1","green",["v0"]],["r1:2","esp:0","green",["h0","v38"]],["vcc1:VCC","lcd1:VCC","red",["v0"]],["lcd1:GND","esp:GND.8","black",["h0"]],["lcd1:SDA","esp:6","green",["h0"]],["lcd1:SCL","esp:5","green",["h0"]]],"serialMonitor": {"display": "terminal","convertEol": true}
}
编译项目命令
cd esp-rs-demo
# 默认 debug
cargo build
# 或指定 release
cargo build --release
运行模拟器
注： VSCode 需要安装 wokwi 插件
ESP32C3 烧录
espflash flash --monitor target/riscv32imc-unknown-none-elf/debug/esp-rs-demo
